How to provision your IP or ATA device

How to provision your IP or ATA device

So you bought a new IP phone or a new ATA device and you need it provisioned to sipharmony. That's great! Sipharmony is compatible with most major brands for auto provisioning. But just incase you want to make sure the IP phone or ATA you are buying is compatible, we have a support page here that will show you all compatible models. 

You can check our compatibility list here!

How do I provision my device?

It's very easy.
All you have to do is open a ticket, and send us the SERIAL and the MAC ADDRESS of the device. We will get it added to our RPS servers, update the firmware if needed, and have it auto provisioned. 

What about buttons?

You can also tell us how you want your buttons. If you need help deciding what buttons to assign your IP phone, we can help you with that.
The typical setup for a business is
  1. Call Parks
  2. Private Line
  3. Paging
  4. BLF - Extensions

As you can see, getting your new device on sipharmony is easy. Just make sure its on our compatibility list!

    • Related Articles

    • Installing your Grandstream HT802 and HT801 ATA

      Installing your Grandstream HT802 and HT801 ATA is easy!  The Grandstream HT802 and HT801 ATA can be used with any analog phone.  This install is the same procedure for an HT801. The only difference between the HT801 and HT802, are the number of ...
    • Network

      Firewall For assistance with firewall configuration, please contact: If you need a firewall solution, we can help! Ports Please allow the following ports for communication Protocol Port Description Comments Required For UDP & TCP ...